SDS Volume
Volume 38. Hydrocarbons in Water and Seawater, Part II, p None
Source Publication
May, W. E.; Wasik, S. P.; Freeman, D. H.; Anal. Chem. 1978, 50, 997-1000
Conditions:
Room Temp:
25
°C
Salinity:
0 - 40 g(2)/kg sln
Compilers:
Methodology:
A saturated solution of (1) was prepared by pumping salt water through a 'generation column' which was packed with glass beads coated with 1% by weight of (1). The saturated solution was extracted with an 'extractor column' packed with a superficially porous bonded $\ce{C18}$ stationary phase, then a water-acetonitrile solvent was passed through for extraction. The extract was introduced into a liquid chromatograph and the concentration of (1) was measured with a UV detector.
Sample Information:
- Greater than 97% pure.
- Regent grade
- Distilled from potassium permanganate-sodium hydroxide and passed through an XAD-2 column.
Measurement Errors:
Ambient temperature: ±0.05°C
Mass concentration (m/v) (1): Ks ±0.003; So ±0.001
System Components:
- Pyrene, $\ce{ C16H10 }$; [129-00-0] NIST WebBook
- Sodium chloride, $\ce{ NaCl }$; [7647-14-5] NIST WebBook
- Water, $\ce{ H2O }$; [7732-18-5] NIST WebBook
Experimental Data
The solubility of pyrene in aqueous sodium chloride is reported in terms of the Setschenow equation:
log(So/S) = KsCs
where:
So is the solubility of (1) in water (mg/L)
S is the solubility of (1) in saline solution (mg/L)
Ks is the Setschenow constant (L/mol)
Cs in the concentration of sodium chloride (mol/L)
evaluating the equation for S over the range of Cs 0-0.7 mol/L, Ks = 0.286 with So = 0.132.
The corresponding mass percent and mole fraction x1, at salinity = 35 g(2)/kg sln calculated by the compilers are 8.60 × 10-6 g(1)/100 g sln and 7.84 × 10-9.
