SDS Volume (4759)

Volume 73. Metal and Ammonium Formate Systems, p None

Original Measurements

Leonesi, D.; Braghetti, M.; Cingolani, A.; Franzosini, P.; Z. Naturforsch. A 25, 52-5 (1970).

Variables:

Prepared by:

P. Baldini

Method/Apparatus/Procedure:

A Pyrex device, suitable for work under an inert atmosphere, and allowing one to observe the system visually, was used [1]. The initial crystallization temperatures were measured with a Chromel-Alumel thermocouple checked by comparison with a certified $\ce{Pt}$ resistance thermometer, and connected to a L&N Type K-3 potentiometer.

Source and Purity of Materials:
  1. C. Erba RP materials, dried by heating under vacuum, were used.
Estimated Errors:

Ambient temperature: The compiler estimates the accuracy of the temperature measurements to be probably ±0.1 K.
Mass concentration (m/v) (1): No information is given.

References

1 Braghetti, M.; Leonesi, D.; Franzosini, P.; Ric. Sci. 38, 116 (1968).

Components:
  1. Sodium formate, $\ce{ NaCHO2 }$; [141-53-7] NIST WebBook
  2. Sodium iodide, $\ce{ NaI }$; [7681-82-5] NIST WebBook
Experimental Data

Note 1: In the original paper the results were shown in graphical form. The numerical values listed above were given in a personal communication from one of the authors (F.P.) to the compiler.
Note 2: The system could not be investigated above about 300°C due to the thermal instability of the formate.
Note 3: There is a eutectic at 227.7°C and 100 x2 = 17.25.

Melting temperatures for different mole fractions
$T_{\rm{m}}$ ($\pu{K}$) $T_{\rm{m}}$ (°C) $100 x_{2}$
530.7257.5 0
530.0256.8 0.42
529.5256.3 0.73
529.1255.9 0.98
528.6255.4 1.34
527.9254.7 1.79
527.5254.3 2.03
524.4251.2 4.02
521.5248.3 6.00
518.1244.9 7.99
516.7243.5 9.00
514.8241.6 9.98
510.9237.7 12.01
507.2234.0 13.99
505.4232.2 15.00
503.2230.0 15.99
509.7236.5 17.99
521.6248.4 18.98
544.1270.9 20.99
579.5306.3 24.61

(a) The T/K values were calculated the compiler.

Download Data   link to XML output link to JSON output link to JSON-LD output