SDS Volume

Volume 62. Carbon Dioxide in Water and Aqueous Electrolyte Solutions, p None

Source Publication

Setchenow, J.; Ann. Chim. Phys. [Ser. 6] 1892, 25, 226-70.

Conditions:

Room Temp: 288.35 $\pu{K}$
Amount concentration (2): C2/mol dm-3 = 0 - 4.823 g/L

Compiler:

P. Scharlin

Methodology:

Setchenow [1] based his apparatus on those of Fernet (1857) and of Meyer (1857). The manometer was based on ideas he learned from Regnault in 1861. The one meter manometer had three branches, two for measuring the pressure and one a mercury reservoir. The manometer was connected to the absorption cell by a flexible silver capillary. The absorption cell was of two bulbs with a mark in the constricting connection. $\ce{CO2}$ gas was generated, saturated with water vapor and filled the bulbs and manometer to a known pressure less than atmospheric. The liquid was degassed by heating and then passed by the pressure difference into the lower bulb to the mark of known volume. The system was sealed, turned 90 degrees and shaken until equilibrium was established. The gas volume absorbed was reduced to 0 °C and one meter Hg pressure. The Bunsen coefficient was calculated.

Sample Information:
  1. Apparently generated from limestone and sulfuric acid. Dried.
  2. Not specified.
  3. Not specified, assumed to be distilled.
Measurement Errors:

Ambient temperature: The author makes a qualitative statement that the results are good to the second decimal.

Methodology Citation

1 Setchenow, J.; Akad. Nauk. USSR, Mem. Acad. Imp. Sci. St. Petersbourg 1877, 35, 1-59.

System Components:
  1. Carbon dioxide, $\ce{ CO2 }$; [124-38-9] NIST WebBook
  2. Ammonium chloride, $\ce{ NH4Cl }$; [12125-02-9] NIST WebBook
  3. Water, $\ce{ H2O }$; [7732-18-5] NIST WebBook
Experimental Data

Initial solution: 25.80 g NH4Cl + 80.92 cm3 water to make 100 cm3 of solution.

$T$ ($\pu{K}$) $T$ (°C) $C_{2}$ (mol/dm3) α ($\pu{cm3(g) cm-3(l) atm-1}$) DF $K_{\rm{scc}}$ ($\pu{dm3/mol}$)
288.3515.20 1.009 ∞-
288.3515.20.8039 0.956 60.0292
288.3515.20.9646 0.941 50.0314
288.3515.21.206 0.930 40.0294
288.3515.21.608 0.896 30.0321
288.3515.22.412 0.858 20.0292
288.3515.23.215 0.819 1.50.0282
288.3515.24.823 0.7705 10.0243

(a) Calculated by the compiler.

(b) α = Bunsen coefficient [cm3 (STP) cm-3 atm-1].

(c) Ostwald coefficient

Download Data   link to XML output link to JSON output link to JSON-LD output