{"compilation": {"title": "Solubility data from IUPAC SDS Volume 20 (page 113) - 1,4-Dichlorobenzene with Water", "publisher": "The International Union of Pure and Applied Chemistry", "keywords": "Solubility, Solubility data series", "compilers": "A. Vesala", "sources": [{"citation": "Aquan-Yuen, M.; Mackay, D.; Shiu, W. Y.; J. Chem. Eng. Data 1979, 24, 30-4.", "pubtype": "paper", "url": "https://doi.org/10.1021/je60080a009"}], "system": "1,4-Dichlorobenzene with Water", "substances": [{"constituent": 1, "name": "1,4-Dichlorobenzene", "formula": "C6H4Cl2", "molweight": 147.002, "casrn": "106-46-7", "inchi": "InChI=1S/C6H4Cl2/c7-5-1-2-6(8)4-3-5/h1-4H", "inchikey": "OCJBOOLMMGQPQU-UHFFFAOYSA-N", "sample": "Commercial product (BDH), evidently used as received."}, {"constituent": 2, "name": "Water", "formula": "H2O", "molweight": 18.0153, "casrn": "7732-18-5", "inchi": "InChI=1S/H2O/h1H2", "inchikey": "XLYOFNOQVPJJNP-UHFFFAOYSA-N", "sample": "Source and purity not specified."}], "method": "Saturated solution was prepared by adding an excess of solute to water in a closed flask with standing for 24 hours. Then, the sample was allowed to settle at 25 \u00b0C in a thermostat bath for at least 48 hours before analysis. The solubility was determined by solvent extraction followed by gas chromatographic analysis using a Hewlett Packard Model 5750 apparatus (equipped with a flame ionization detector and a 10 ft stainless steel column packed with 10% SE 30 ultraphase on high performance Chromosorb P, 60/80 mesh).", "dataset": [{"series": 1, "points": [{"pntnum": 1, "conditions": [{"property": "Ambient temperature", "number": "2.5e+01", "significand": "2.5", "exponent": "1", "sigfigs": "2", "unit": "°C"}], "data": [{"property": "Mole fraction - Liquid (1)", "number": "1.0713e-05", "significand": "1.0713", "exponent": "-5", "sigfigs": "5", "unit": "1"}, {"property": "Amount concentration (1)", "number": "5.9283e-04", "significand": "5.9283", "exponent": "-4", "sigfigs": "5", "unit": "mol/dm3"}], "supplemental": []}]}]}}