Ari L. Horvath 1 1.5e+01 Ambient temperature 2 1.5 °C 0 6.2e+00 Amount concentration (1) 2 6.2 mol/m3 1 -3 6.97e-03 Percent mass fraction (1) 3 6.97 1 -4 5.95e-04 Mole fraction - Liquid (1) 3 5.95 1 1 2.5e+01 Ambient temperature 2 2.5 °C 0 8.6e+00 Amount concentration (1) 2 8.6 mol/m3 2 -3 9.78e-03 Percent mass fraction (1) 3 9.78 1 -4 8.35e-04 Mole fraction - Liquid (1) 3 8.35 1 1 3.0e+01 Ambient temperature 2 3.0 °C 0 9.3e+00 Amount concentration (1) 2 9.3 mol/m3 3 -2 1.06e-02 Percent mass fraction (1) 3 1.06 1 -4 9.08e-04 Mole fraction - Liquid (1) 3 9.08 1 1 3.5e+01 Ambient temperature 2 3.5 °C 1 1.14e+01 Amount concentration (1) 3 1.14 mol/m3 4 -2 1.31e-02 Percent mass fraction (1) 3 1.31 1 -3 1.12e-03 Mole fraction - Liquid (1) 3 1.12 1 1 4.5e+01 Ambient temperature 2 4.5 °C 1 1.56e+01 Amount concentration (1) 3 1.56 mol/m3 5 -2 1.82e-02 Percent mass fraction (1) 3 1.82 1 -3 1.55e-03 Mole fraction - Liquid (1) 3 1.55 1 1 Solubility, Solubility data series The saturation of tetrachloromethane with water occurred in a closed system, protected from atmospheric moisture; the saturating vessel was placed in a constant temperature water bath. The concentration of water in tetrachloromethane was measured using the Karl Fischer titration method with a 'dead stop' end-point determination [1]. Fifteen observations were made at each temperature. The International Union of Pure and Applied Chemistry Wernimont, G.; Hopkinson, F. J. Ind. Eng. Chem., Anal. Ed. 1943, 272. paper https://doi.org/10.1021/i560116a017 Glasoe, P. K.; Schultz, S. D.; J. Chem. Eng. Data 1972, 17, 66-8. paper https://doi.org/10.1021/je60052a025 7732-18-5 2 H2O InChI=1S/H2O/h1H2 XLYOFNOQVPJJNP-UHFFFAOYSA-N 18.0153 Water Source not given. Reagent grade, purified by distillation before use. 56-23-5 1 CCl4 InChI=1S/CCl4/c2-1(3,4)5 VZGDMQKNWNREIO-UHFFFAOYSA-N 153.823 Tetrachloromethane Distilled. Tetrachloromethane with Water